STUART TURNER SHOWER PUMPS

1. With your plumber, estimate the maximum flow required from shower/bathroom equipment in litres per minute,

2. Check pressure requirements of shower/bathroom equipment to be metres head.

3. Select the performance curve for the type of pump required.

4. From the horizontal scale on the chart read vertically upwards the flow rate in litres per minute desired. where this line intersects the pump performance curve it will show the pump in metres head on the verticle scale. As long as that head of pressure is sufficient to drive the shower's equipment selected, the minimum size of the pump should be used.

5. Remember the pump pressure is in addition to the static pressure that may exist within the system.

NOTE: Pumps must not be connected directly to mains feed water system.

The Showermate range of booster pumps has been designed with single shower and bath shower installations in mind. Compact in design with a choice of single or twin pump heads you will find a pump to suit your showering needs.

Designed to be hidden away, Showermate pumps are fully automatic, requiring little or no maintenance during their working life.

All Showermate pumps are supplied with a full twelve months' parts and labour guarantee.

The Showermate 1.2 bar single impeller medium pressure pump is ideally suited for use as an outlet pump, boosting the water pressure between the shower mixer valve and shower rose. It can also be used to locally boost water pressure in hot or cold water systems. Supplied ready to install the pump is fitted with flow switches set at 0.5 l/m for positive head operation. On a negative head system they can be controlled using either air or non-latching pull cord switches.

The Showermate range of booster pumps has been designed with single shower and bath shower installations in mind. Compact in design with a choice of single or twin pump heads you will find a pump to suit your showering needs.

Designed to be hidden away, Showermate pumps are fully automatic, requiring little or no maintenance during their working life.

All Showermate pumps are supplied with a full twelve months' parts and labour guarantee.

The Showermate 1.4 bar twin impeller medium pressure pump is the perfect solution for boosting the incoming hot and cold supplies to a low-pressure shower valve or bath shower mixer. Supplied ready to install the pump is fitted with flow switches set at 0.5 l/m for positive head operation. On a negative head system they can be controlled using either air or non-latching pull cord switches.

The Showermate range of booster pumps has been designed with single shower and bath shower installations in mind. Compact in design with a choice of single or twin pump heads you will find a pump to suit your showering needs.

Designed to be hidden away, Showermate pumps are fully automatic, requiring little or no maintenance during their working life.

All Showermate pumps are supplied with a full twelve months' parts and labour guarantee.

The Showermate 1.8 bar twin impeller high-pressure pump is the perfect solution for boosting the incoming hot and cold supplies to high-pressure shower valve. Supplied ready to install the pump is fitted with flow switches set at 0.5 l/m for positive head operation, On a negative head system they can be controlled using either air or non-latching pull cord switches .

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 2.0 bar single high-pressure pump is driven by a continuously rated thermally protected induction motor. The Monsoon 2.0 bar single is ideally suited as an outlet pump installed between the shower valve and showerhead. It can also be used to locally boost hot or cold water supplies in both domestic and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. In situations where there is no flow the pump can be started with the addition of an air or non-latching pull cord switch.

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 3.0 bar single high-pressure pump driven by a continuously rated thermally protected induction motor. The Monsoon 3.0 bar single is ideally suited as an outlet pump installed between the shower valve and showerhead. It can also be used to locally boost hot or cold water supplies in both domestic and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. In situations where there is no flow the pump can be started with the addition of an air or non-latching pull cord switch.

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 1.0 bar twin medium-pressure pump is driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies it can be used to boost water pressure to a shower or bathroom. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. In situations where there is no flow the pump can be started with the addition of an air or non-latching pull cord switch.

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 3.0 bar twin high-pressure pump is driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies it can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. In situations where there is no flow the pump can be started with the addition of an air or non-latching pull cord switch.

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 3.0 bar twin high-pressure pump is driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies it can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. In situations where there is no flow the pump can be started with the addition of an air or non-latching pull cord switch.

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 4.0 bar twin high-pressure pumps driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies to the more demanding high pressure systems the 4.0 bar twin can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. In situations where there is no flow the pump can be started with the addition of an air or non-latching pull cord switch.

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 1.5 bar negative single medium-pressure pump driven by a continuously rated thermally protected induction motor. It is designed to be installed into systems where some or all of the outlets are above the cold water cistern (a negative position) but the requirements is for a fully automatic pump. The 1.5 bar negative single is ideally suited as an outlet pump installed between the shower thermostat and control valve. It can also be used to locally boost hot or cold water supplies in both domestic and commercial premises

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 3.0 bar negative single high-pressure pump driven by a continuously rated thermally protected induction motor. Is designed to be installed into systems where some or all of the outlets are above the cold water cistern (a negative position) but the requirements is for a fully automatic pump. The 3.0 bar negative single is ideally suited as an outlet pump installed between the shower thermostat and control valve. It can also be used to locally boost hot or cold water supplies in both domestic and commercial premises

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon N 2.0 bar twin high-pressure pump driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies it can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Is designed to be installed into systems where some or all of the outlets are above the cold water cistern (a negative position) but the requirements is for a fully automatic pump.

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 3.0 bar negative Twin high-pressure pump driven by a continuously rated thermally protected induction motor. Is designed to be installed into systems where some or all of the outlets are above the cold water cistern (a negative position) but the requirements is for a fully automatic pump. The 3.0 bar negative Twin is ideally suited as an outlet pump installed between the shower thermostat and control valve. It can also be used to locally boost hot or cold water supplies in both domestic and commercial premises

Monsoon is a range of 9 pumps constructed in brass and designed to meet the pressure boosting demands found within most domestic and light commercial property. The range offers a choice of both Single and Twin pumps with the either flow switch positive or pressure / flow switch negative head fully automatic control systems. All Monsoon pumps are supplied with anti vibration feet, flexible hoses, inlet strainers and power supply cable and are ready to install, for that extra piece of mind they carry a full two-year guarantee.

Monsoon 3.0 bar negative Twin high-pressure pump driven by a continuously rated thermally protected induction motor. Is designed to be installed into systems where some or all of the outlets are above the cold water cistern (a negative position) but the requirements is for a fully automatic pump. The 3.0 bar negative Twin is ideally suited as an outlet pump installed between the shower thermostat and control valve. It can also be used to locally boost hot or cold water supplies in both domestic and commercial premises